| setting_key | setting_value | comment |
|---|---|---|
| 1CHIP | 10 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
| 2CHIP | 15 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
| AC | 35 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
| Blocks | 100 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
| Concrete | 100 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
| other | 99 | Thickness of new surfacing when treatment with this material type is applied in Rehab |
Surface Thickness Reset - New
Overview
Parameters held in under the surf_thickness_new lookup set define updated Surface Thickness assigned after a Rehabilitation treatment.
Lookup Set Key
The key to identify this set in the model code is ‘surf_thickness_new’ (case-sensitive)
Change Level
Parameters held under the surf_thickness_new lookup set generally do NOT need to be modified for each network.
Lookup Parameters
Parameters contained in this lookup set are detailed below. Note that parameter keys are case-sensitive.
Important
Values shown under the column ‘setting_value’ are defaults/example values. You should take responsibility to understand and modify these values for each project based on your specific network configuration.