Surface Material Reset

Overview

Parameters held in under the treat_surf_materials lookup set define the Surface Material assigned after treatment, dependent on the treatment type.

Lookup Set Key

The key to identify this set in the model code is ‘treat_surf_materials’ (case-sensitive)

Change Level

Parameters held under the treat_surf_materials lookup set generally do NOT need to be modified for each network.

Lookup Parameters

Parameters contained in this lookup set are detailed below. Note that parameter keys are case-sensitive.

setting_key	setting_value	comment
Chipseal_S	1CHIP	Surface Material assigned after placement of 'Chipseal_S' treatment
ChipSeal_P	2CHIP	Surface Material assigned after placement of 'ChipSeal_P' treatment
PreSeal	1CHIP	Surface Material assigned after placement of 'PreSeal' treatment
ChipSeal_H	2CHIP	Surface Material assigned after placement of 'ChipSeal_H' treatment
ThinAC_P	AC	Surface Material assigned after placement of 'ThinAC_P' treatment
ThinAC_H	AC	Surface Material assigned after placement of 'ThinAC_H' treatment
HMaint_AC	AC	Surface Material assigned after placement of 'HMaint_AC' treatment
Rehab_CS_RL	2CHIP	Surface Material assigned after placement of 'Rehab_CS_RL' treatment
Rehab_CS_RM	2CHIP	Surface Material assigned after placement of 'Rehab_CS_RM' treatment
Rehab_CS_RH	2CHIP	Surface Material assigned after placement of 'Rehab_CS_RH' treatment
Rehab_CS_UL	2CHIP	Surface Material assigned after placement of 'Rehab_CS_UL' treatment
Rehab_CS_UM	2CHIP	Surface Material assigned after placement of 'Rehab_CS_UM' treatment
Rehab_CS_UH	2CHIP	Surface Material assigned after placement of 'Rehab_CS_UH' treatment
Rehab_AC_RL	AC	Surface Material assigned after placement of 'Rehab_AC_RL' treatment
Rehab_AC_RM	AC	Surface Material assigned after placement of 'Rehab_AC_RM' treatment
Rehab_AC_RH	AC	Surface Material assigned after placement of 'Rehab_AC_RH' treatment
Rehab_AC_UL	AC	Surface Material assigned after placement of 'Rehab_AC_UL' treatment
Rehab_AC_UM	AC	Surface Material assigned after placement of 'Rehab_AC_UM' treatment
Rehab_AC_UH	AC	Surface Material assigned after placement of 'Rehab_AC_UH' treatment
BlockRep	Blocks	Surface Material assigned after placement of 'BlockRep' treatment
ConcRep	Concrete	Surface Material assigned after placement of 'ConcRep' treatment
Xtreat	other	Surface Material assigned after placement of 'Xtreat' treatment

Important

Values shown under the column ‘setting_value’ are defaults/example values. You should take responsibility to understand and modify these values for each project based on your specific network configuration.